|
Basic variant - PRK.02B-00.00.0000.00
Composition of semiautomatic device
| unit of pneumatic and electronic control |
|
|
| Tensor platform |
|
|
| Three position valve |
|
d(mm) = 15 / 20 / 25 |
| Device for lowering the filling nozzle |
|
M |
| Device for automatic supply of the tare for filling and sealing |
|
2000 |
| Automatic sealing of caps |
|
0010 |
| Device of roller bed on the table |
|
R |
Designer requirements to a semiautomatic device and its components.
| Way of a metering-in |
|
weight (netto). |
| Weight of one doze min(netto), kg |
|
0,5 |
| Weight of one doze max(brutto), kg |
|
60,0 |
| The lapse of a metering-in matches to GOST 9980.3 |
|
|
Maximum gabarits of container, mm
| length х width х altitude |
|
400 х 400 х 520 |
| Minimal diameter of tare’s neck, mm* |
|
22 |
| * Other diameters of tare’s neck are discussed by making an order |
|
|
Liquid is supplied by gravity or by pump, Pmax without pulsations
| Liquid head at the inlet fitting of semiautomatic device, MPa |
|
|
| min |
|
0.05 |
| max |
|
0.5 |
Compressed air
| Pressure, MPA |
|
0,5 ÷ 1,0 |
| Consumption of compressed air, m3/hour |
|
no more 2,0 |
Power supply by the electric power
| Voltage, V |
|
˜220 |
| Frequency, Hz |
|
50 |
| Power consumption, kW, not more |
|
0,1 |
Strain sensor, produced by the firm FLINTEC, Germany
Overall dimensions of a semiautomatic device , mm
| length х width х altitude |
|
2000 х 1000 х 2500 |
| Mass of a semiautomatic device, kg, no more |
|
280 |
Reduced productivity, not more
| - acrylic primer, which foams, for doses of up to 10 kg. |
|
up to 2500* kg/hour |
* Productivity of the semiautomatic device according to the products, its pressure and volume of the dose.
Degree of protection according to classification “PUE” - IP54
The semiautomatic device is designed for operation in the premises with the temperature 20 (±5)°С.
Class of air cleaning according to GOST 17433-72 is not rougher than 10.
One operator performs the maintenance of the semiautomatic device.
|
